DES-3550 Layer 2 Fast Ethernet Switch
Example usage:
To display the switch history log:
DES-3550:4#show log index 5
Command: show log index 5
Index Time Log Text
----- ------------------- ----------------------------------------------------
5 00000 days 00:01:09 Successful login through Console (Username: Anonymous)
4 00000 days 00:00:14 System started up
3 00000 days 00:00:06 Port 1 link up, 100Mbps FULL duplex
2 00000 days 00:00:01 Spanning Tree Protocol is disabled
1 00000 days 00:06:31 Configuration saved to flash (Username: Anonymous)
DES-3550:4#
enable syslog
Purpose Used to enable the system log to be sent to a remote host.
Syntax
enable syslog
Description The enable syslog command enables the system log to be sent to a
remote host.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To the syslog function on the Switch:
DES-3550:4#enable syslog
Command: enable syslog
Success.
DES-3550:4#
82
To Next Page
Loading...
