DES-3550 Layer 2 Fast Ethernet Switch
disable syslog
Purpose Used to enable the system log to be sent to a remote host.
Syntax
disable syslog
Description
The disable syslog command enables the system log to be sent to a
remote host.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable the syslog function on the Switch:
DES-3550:4#disable syslog
Command: disable syslog
Success.
DES-3550:4#
show syslog
Purpose Used to display the syslog protocol status as enabled or disabled.
Syntax
show syslog
Description
The show syslog command displays the syslog status as enabled or
disabled.
Parameters None.
Restrictions None.
Example usage:
To display the current status of the syslog function:
DES-3550:4#show syslog
Command: show syslog
Syslog Global State: Enabled
DES-3550:4#
83
To Next Page
Loading...
