D-Link DFL-1660

List of Examples
1. Example Notation .............................................................................................15
2.1. Enabling remote management via HTTPS ...........................................................35
2.2. Enabling SSH Remote Access ..........................................................................41
2.3. Listing Configuration Objects ...........................................................................55
2.4. Displaying a Configuration Object .....................................................................55
2.5. Editing a Configuration Object .........................................................................56
2.6. Adding a Configuration Object .........................................................................56
2.7. Deleting a Configuration Object ........................................................................57
2.8. Undeleting a Configuration Object ....................................................................57
2.9. Listing Modified Configuration Objects ..............................................................58
2.10. Activating and Committing a Configuration .......................................................58
2.11. Enable Logging to a Syslog Host .....................................................................62
2.12. Sending SNMP Traps to an SNMP Trap Receiver ...............................................64
2.13. RADIUS Accounting Server Setup ..................................................................69
2.14. Enabling SNMP Monitoring ...........................................................................75
2.15. Performing a Complete System Backup ............................................................86
2.16. Complete Hardware Reset to Factory Defaults ...................................................86
3.1. Adding an IP Host Address ..............................................................................90
3.2. Adding an IP Network .....................................................................................90
3.3. Adding an IP Range ........................................................................................91
3.4. Deleting an Address Object ..............................................................................91
3.5. Adding an Ethernet Address .............................................................................92
3.6. Adding IPv6 Host Addresses ............................................................................94
3.7. Enabling IPv6 Globally ...................................................................................95
3.8. Enabling IPv6 on an Interface ...........................................................................95
3.9. Enabling IPv6 Advertisements ..........................................................................96
3.10. Adding an IPv6 Route and Enabling Proxy ND ..................................................97
3.11. Listing the Available Services ....................................................................... 100
3.12. Viewing a Specific Service ........................................................................... 101
3.13. Creating a Custom TCP/UDP Service ............................................................. 104
3.14. Adding an IP Protocol Service ...................................................................... 106
3.15. Defining a VLAN ....................................................................................... 119
3.16. Configuring a PPPoE Client ......................................................................... 122
3.17. Creating an Interface Group .......................................................................... 126
3.18. Displaying the ARP Cache ........................................................................... 129
3.19. Flushing the ARP Cache ..............................................................................129
3.20. Defining an ARP/Neighbor Discovery Object ..................................................132
3.21. Adding an Allow IP Rule ..............................................................................143
3.22. Setting up a Time-Scheduled Security Policy ................................................... 149
3.23. Uploading a Certificate with Web Interface ..................................................... 153
3.24. Associating Certificates with IPsec Tunnels ..................................................... 153
3.25. Setting the Current Date and Time ................................................................. 156
3.26. Setting the Time Zone ................................................................................. 157
3.27. Enabling DST ............................................................................................ 157
3.28. Enabling Time Synchronization using SNTP ....................................................158
3.29. Manually Triggering a Time Synchronization ..................................................159
3.30. Modifying the Maximum Adjustment Value ....................................................159
3.31. Forcing Time Synchronization ......................................................................160
3.32. Enabling the D-Link NTP Server ................................................................... 160
3.33. Configuring DNS Servers ............................................................................. 163
4.1. Displaying the main Routing Table .................................................................. 174
4.2. Adding a Route to the main Table ................................................................... 175
4.3. Displaying the Core Routes ............................................................................176
4.4. Creating a Routing Table ...............................................................................187
4.5. Adding Routes ............................................................................................. 187
4.6. Creating a Routing Rule ................................................................................188
4.7. Policy-based Routing with Multiple ISPs .......................................................... 191
4.8. Setting Up RLB ...........................................................................................197
12