To restart the same interface:
gw-world:/> ospf -ifacedown ospf_if1
An entire functioning OSPFRouteProcess can also be halted. For example, assuming that there is
only one OSPFRouteProcess object defined in the configuration, the CLI command to halt it is:
gw-world:/> ospf -execute=stop
To start the stopped OSPFRouteProcess:
gw-world:/> ospf -execute=start
To stop and then start in a single command:
gw-world:/> ospf -execute=restart
The ospf command options are fully described in the separate NetDefendOS CLI Reference Guide.
4.5.7. OSPF Troubleshooting Chapter 4. Routing
226
To Next Page
Loading...
