The default value if 600 seconds.
The Anti-Spam address cache is emptied at startup or reconfiguration.
For the DNSBL subsystem overall:
• Number of emails checked.
• Number of emails Spam tagged.
• Number of dropped emails.
For each DNSBL server accessed:
• Number of positive (is Spam) responses from each configured DNSBL server.
• Number of queries sent to each configured DNSBL server.
• Number of failed queries (without replies) for each configured DNSBL server.
The dnsbl CLI Command
The dnsbl CLI command provides a means to control and monitor the operation of the Spam
filtering module. The dnsbl command on its own without options shows the overall status of all
ALGs. If the name of the SMTP ALG object on which DNSBL Spam filtering is enabled is
my_smtp_alg then the output would be:
gw-world:/> dnsbl
DNSBL Contexts:
Name Status Spam Drop Accept
------------------------ -------- -------- -------- --------
my_smtp_alg active 156 65 34299
alt_smtp_alg inactive 0 0 0
The -show option provides a summary of the Spam filtering operation of a specific ALG. It is used
below to examine activity for my_smtp_alg although in this case, the ALG object has not yet
processed any emails.
gw-world:/> dnsbl my_smtp_alg -show
Drop Threshold : 20
Spam Threshold : 10
Use TXT records : yes
IP Cache disabled
Configured BlackLists : 4
Disabled BlackLists : 0
Current Sessions : 0
Statistics:
Total number of mails checked : 0
Number of mails dropped : 0
Number of mails spam tagged : 0
Number of mails accepted : 0
BlackList Status Value Total Matches Failed
------------------------- -------- ----- -------- -------- --------
zen.spamhaus.org active 25 0 0 0
cbl.abuseat.org active 20 0 0 0
dnsbl.sorbs.net active 5 0 0 0
6.2.5. The SMTP ALG Chapter 6. Security Mechanisms
294
To Next Page
Loading...
