D-Link DGS-1100-06/ME - System > Port Configuration > Port Settings

4 SmartConsole Utility D-Link DGS-1100-06/ME User Manual
12
Figure 4.7 – SmartConsole Device Settings
Password Settings
Select a switch from the Device List. Click on this icon to launch the Device Password Manager window.
Here you can enter a new password and confirm it.
Figure 4.8 – SmartConsole Password Settings
Firmware Upgrade
Select one or many switches of the same model name from the Device List. Click on this icon to launch the
Firmware Upgrade window. Specify the Firmware Path (or Browse for one) that you are going to use. Input
the correct password of the device, and then click Upgrade. The state will show "OK" after completion, or
“Fail” if the firmware upgrade fails or cannot be completed for any reason.
Figure 4.9 – Firmware Upgrade