5 Configuration D-Link DGS-1100-06/ME User Manual
34
Figure 5.44 - Configuration > 802.1Q VLAN > Example VIDs
Click the VID number, the configuration of VLAN group which selected by user will displayed.
Change the port assignment then click Apply to implement changes made. User can also click the Previous
Page to the go back to the previous page.
Figure 5.45 - Configuration > 802.1Q VLAN > VID Assignments
Select Enabled of Asymmetric VLAN and click Apply to change to Asymmetric VLAN mode:
Figure 5.46 - Configuration > 802.1Q VLAN > VID Assignments
Configuration > 802.1Q VLAN PVID
The 802.1Q VLAN PVID setting allows user to configure the PVID for each ports. Click Apply to implement
changes made.
Figure 5.47 – Configuration > 802.1Q VLAN PVID
Configuration > 802.1Q Management VLAN
The 802.1Q Management VLAN setting allows user to transfer the authority of the switch from the default
VLAN to others created by users. This allows managing the whole network more flexible.
By default, the Management VLAN is disabled. You can select any existing VLAN as the management VLAN
when this function is enabled. There can only be one management VLAN at a time. Click Apply to
implement changes made.
Figure 5.48 – Configuration > 802.1Q Management VLAN
To Next Page
Loading...
