30
Delete Group: To delete previously defined SNMP Community group,
press “Delete Group” button, the Delete SNMP Community configuration
window will pop out; checked the delete dialog box. Press “Apply” to delete
the selected SNMP Community Group.
Figure 27. Delete SNMP Community group
Modify Group: To modify previously defined SNMP Community group,
click on the ID parameter to enter to the selected SNMP Community Group
to configure its community name and community enable. Press “Apply” to
save change of the SNMP Community Group.
Figure 28. Modify SNMP Community group
Configure SNMP Trap:
Figure 29. Configure SNMP Trap Setting
To Next Page
Loading...
Need help?
General