D-Link DIR-100 - Internet Setup

DIR-100 Triple Play Router
The table below lists the various configuration and display menus found in each menu directory. The page
number below the menu directory title is the first page of the description of the menus found in that
directory.
Directory Contents
Wizard
Page 11
The setup wizard is used to quickly configure the Internet connection. Use the
wizard to configure the Router for PPPoE, Dynamic IP and Static IP Internet
connections.
System
Page 37
These menus are used for administration and maintenance; menus include:
System Status, System Settings, Administrator Settings, Firmware Upgrade, and
Configuration Tools.
WAN
Page 15
These menus are used for manual configuration of the Internet connection, VLAN
configuration and DNS settings; menus include: Connected Type, VLAN Settings
and DNS.
LAN
Page 21
Use these menus to configure IP settings and DHCP service for the private LAN;
menus include LAN Settings and DHCP Client List.
NAT
Page 23
These advanced settings menus are used to configure the Router to use
applications and protocols that might not be compatible with NAT; menus include
Virtual Server, Special Application, Port Mapping, ALG, DMZ and DDNS Settings.
Firewall
Page 30
Use these advanced settings menus to control what traffic is allowed or denied
through the Router; menus include Firewall Options, Client Filtering and MAC
Control.
Routing
Page 34
Use the advanced Routing menus to view the contents of the routing table, or to
configure static routing static routing and configure the role of the router on the
network; menus include Routing Table, Static Routing and Dynamic Routing.
UPnP
Page 36
The UPnP Settings is used to enable and configure UPnP and view Port Mapping
for UPnP.
Help An html-based menu with hyperlinks to description of the various menus
contained in the web manager.
Internet Setup
The Router’s Internet connection can be configured using the Setup Wizard or set up manually. To access
the Internet connection Setup Wizard, click on the Wizard menu directory and follow the instructions for set
up. To configure the Internet connection manually, click on the WAN settings directory and configure the
Connection Type accordingly.
10