DIR-100 Triple Play Router
For Dynamic IP Address connections, the MAC address of your Ethernet adapter can be copied to the
Router. Some ISPs use the unique MAC address of your computer’s Ethernet adapter for identification and
for IP address assignment (DHCP) when you first access their network. This can prevent the Router (which
has a different MAC address) from being allowed access to the ISP’s network (and the Internet). To clone
the MAC address of your computer’s Ethernet adapter, select Enabled for MAC Cloning and click the Clone
MAC Address button. Click Next to continue.
DHCP Connection Setting Description
MAC Cloning To use MAC Cloning, click to select the Enabled option and click
on the Clone MAC Address button.
MAC Address If you clone the MAC address of your computer to the Router, the
MAC address will appear here. This will be the MAC address
recorded by the ISP’s server when the connection is initiated.
Clone MAC Address The default MAC address is set to the Internet’s physical
interface MAC address on the Broadband Router. You can use
the Clone MAC Address button to copy the MAC address your
computer’s Ethernet Card to the Router.
Setup Wizard – Configure Static IP Address Connection
To Next Page
Loading...
