USB Flash
Drive
In the HotSpot Mode, the DIR-505 acts as a wireless network adapter for your Ethernet-enabled device (such as a Laptop or an
Internet Tablet). If you are going to connect an Ethernet-enabled devices to your DIR-505, move the switch to “Wi-Fi HotSpot
Mode”. Then, plug the DIR-505 into a wall outlet and verify that the power LED is lit. Wi-Fi Hot Spot Mode has NAT which allows
an IP network to maintain a public IP address separately from your private IP address. Additionally, it enhances private network
security by limiting the access of external computers in the private IP network space.
To Next Page
Loading...
