D-Link DIR-505 - Wi-Fi Hot Spot Mode

17D-Link DIR-505 User Manual
Section 2 - Installation
Wi-Fi Hot Spot Mode
1. Move the switch to “Wi-Fi Hot Spot”. Then, plug the DIR-505
into a wall outlet and verify that the power LED has turned
green.
2. From your laptop or mobile device go to your Wireless Utility to
display the available wireless networks and select the network
that is displayed on your companion card (ex: dlink-a8fa). Then,
enter the Wi-Fi password included in your card (akbdj1936).
3. Open a web browser. First time users will automatically be directed
to the pre-wizard. Please follow the on-screen instructions to
complete the setup.
If this is your second time type http://dlinkrouter in the address
bar. Click Launch Wireless Setup Wizard to continue.
Wi-Fi Hot
Spot
90mm
54mm
Web browser link:
http://dlinkrouter or
http:// 192.168.0.1
Default conguration
Username: “Admin”
Password: ““ (leave the eld blank)
Wi- Fi Name (SSID) :
dlinka8fa
Wi-Fi Password :
akbdj19368
Web browser link:
http://dlinkrouter or
http:// 192.168.0.1
Your conguration
Username: Admin
Password:
Wi- Fi Name (SSID) :
Wi-Fi Password :
D-Link DIR-505 Mobile Companion Wi-Fi Conguration Note