62D-Link DIR-505 User Manual
Section 3 - Conguration
Advanced Wireless
Set the transmit power of the antennas.
WMM is QoS for your wireless network. This will improve
the quality of video and voice applications for your
wireless clients.
Check this box to reduce the guard interval time therefore
increasing the data capacity. However, it’s less reliable and
may create higher data loss.
Check to enable this feature.
This enables 802.11d operation. 802.11d is a wireless
specification developed to allow implementation of
wireless networks in countries that cannot use the 802.11
standard. This feature should only be enabled if you are
in a country that requires it.
You may choose to Enable or Disable this feature. Enabling
this feature allows two “channels” or paths on which data
can travel to be combined to increase performance in
some environments.
Transmit
Power:
WMM Enable:
Short GI:
IGMP
Snooping:
WLAN
Partition:
HT20/40
Coexistence:
To Next Page
Loading...
