D-Link DIR-505 - Wi-Fi Protected Setup (WPS)

63D-Link DIR-505 User Manual
Section 3 - Conguration
Wi-Fi Protected Setup (WPS)
Enable the Wi-Fi Protected Setup feature.
Note: if this option is unchecked, the WPS button on the
side of the router will be disabled.
Locking the WPS-PIN Method prevents the settings
from being changed by any external registrar using
its PIN. Devices can still be added to the wireless
network using the Wi-Fi Protected Setup Push Button
Conguration (WPS-PBC). It is still possible to change
wireless networks settings with Manual Wireless
Network Setup or Wireless Network Setu Wizard.
A PIN is a unique number that can be used to add
the router to an existing network or to create a new
network. Only the Administrator (“admin” account) can
change or reset the PIN.
Shows the current PIN.
Restore the default PIN of the router.
Create a random number that is a valid PIN. This becomes
the router’s PIN. You can then copy this PIN to the user
interface of the wireless client.
Enable:
Disable WPS-PIN
Method :
PIN Settings:
Current PIN:
Reset PIN to
Default:
Generate New
PIN:
Wi-Fi Protected Setup (WPS) System is a simplied method for securing your wireless network during the “Initial setup” as well
as the “Add New Device” processes. The Wi-Fi Alliance (WFA) has certied it across dierent products as well as manufactures.
The process is just as easy as pressing a button for the Push-Button Method or correctly entering the 8-digit code for the Pin
Code Method. The time reduction in setup and ease of use are quite benecial, while the highest wireless Security setting of
WPA2 is automatically used.