D-Link DIR-505 - Manual Configuration; Wireless Settings; Router Mode

45D-Link DIR-505 User Manual
Section 4 - Security
Manual Conguration
Wireless Settings
Router Mode
Enable Wireless:
Wireless Mode:
Wireless
Network Name:
802.11 Mode:
Wireless
Channel:
Enable Auto
Channel Scan:
Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all the
wireless functions. You may also set up a specic time range
(schedule). Select a schedule from the drop-down menu or
click Add New to create a new schedule.
Select Router from the drop-down menu.
When you are browsing for available wireless networks, this
is the name that will appear in the list (unless Visibility Status
is set to Invisible, see below). This name is also referred to as
the SSID. For security purposes, it is highly recommended
to change from the default network name.
Select one of the following:
802.11b Only - Select if you are only using 802.11b wireless
clients.
802.11g Only - Select if you are only using 802.11g wireless clients.
802.11n Only - Select if you are only using 802.11n wireless clients.
Mixed 802.11g and 802.11b - Select if you are using a mix of 802.11g and 11b wireless clients.
Mixed 802.11n and 802.11g - Select if you are using a mix of 802.11n and 11g wireless clients.
Mixed 802.11n, 802.11g and 802.11b - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.
Indicates the channel setting for the DIR-505. The Channel can be changed to t the channel setting for an existing wireless
network or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out.
The Auto Channel Scan setting can be selected to allow the DIR-505 to choose the channel with the least amount of interference.