D-Link Dis-200G Series

DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
146
none
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the DSCP to CoS map infomration on the switch
Example
This example shows how to display the DSCP to CoS map information.
Switch# show mls qos map dscp-cos
0 1 2 3 4 5 6 7 8 9
---------------------------------
00 00 00 00 00 00 00 00 00 01 01
10 01 01 01 01 01 01 01 02 01 02
20 02 02 02 02 03 03 03 03 03 03
30 03 03 04 04 04 04 04 04 04 04
40 05 05 05 05 05 05 05 05 06 06
50 06 06 06 06 06 06 07 07 07 07
60 07 07 07 07
Switch#
28-8 show mls qos queueing
This command is used to display the QoS queuing information.
show mls qos queuing
Parameters
none
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline