Above: Click “Remote Control > Telnet Console” on the web GUI to get the Telnet screen.
Telnet and SSH commands and their explanations
help
Display a list of supported commands.
quit
Exit the current session and disconnect from the client.
cls
Clear the screen.
version
Display the firmware version information (version, build number, description).
terminal
Activate terminal passthrough mode for the RS-232 serial port. This mode
provides Serial-over-IP functionality. The hotkey sequence “ESC + e-x-i-t”
(type “exit” while holding the ESC key) will switc the screen back to command
mode.
vscaa
Auto-adjust the Host Console’s video.
vscreset
This command resets the video modes. This is similar to the settings in the
Host Console menu item Options > Video Settings.
The extensions of this command are described below:
53
To Next Page
Loading...
