vscreset modes:
vscreset allmodes:
vscreset all:
Reset the settings for the current video mode.
Reset the settings for all video modes.
Reset all video modes and global settings such as
brightness and contrast.
5. The administrator can also type in a Telnet command as required by the Telnet client.
For instance, in a UNIX shell the command will look like this:
telnet 192.168.0.70
SSH Console (SSH2)
The administrator can also run an SSH-supported terminal emulation program, such as
PuTTY (see the screenshots below).
The DKVM-IP1 supports the SSH security protocol. The device uses version 2 of the SSH
protocol (SSH2) to encrypt the transferred data and secure transmissions. The SSH
configuration interface is the same as that of Telnet, except for the fact that SSH is
encrypted and therefore more secure.
Above: The PuTTY terminal emulation program supports SSH and SSH2. This is the program’s
configuration screen.
54
To Next Page
Loading...
