D-Link DSL-124 User Manual

60D-Link DSL-124 Wireless N300 ADSL2+ Modem Router User Manual
Section 4 - Conguration
Wireless Advanced (continued)
Broadcast SSID: Visible networks conveniently advertise their existence to devices
looking for Wi-Fi networks to join. Invisible, or hidden, networks
do not. To join an invisible network users must manually input its
SSID. Note: Making a network Invisible is not a form of security.
Relay Blocking: Enable user isolation to prevent wireless clients from
communicating with each other. This may be desired if the DSL-
2745 is used in a public setting
Ethernet to
Wireless Blocking:
Enable user isolate to prevent wireless and Ethernet clients from
communicating with each other. This may be desired if the DSL-124
is used in a public setting
Wifi Multicast to
Unicast:
Enable to convert multicast packets to unicast packets over Wi-Fi
using single session protocols. This may be desirable to improve
streaming quality to multiple clients.
Aggregation: Enable to potentially increase throughput by sending multiple frames
in a single packet.
Short GI: Enable to reduce empty space between symbol transmission and
potentially increase throughput. May reduce speeds in areas with
high radio echo.

D-Link DSL-124 Specifications

General

Wireless Standard	802.11b/g/n
Frequency Band	2.4GHz
LAN Ports	4 x 10/100Mbps
Security	WPA/WPA2
Antenna	2 x External Antennas
Wired Ports	1 x RJ-11 ADSL port
ADSL Standards	ADSL2/2+