33D-Link DSL-124 Wireless N300 ADSL2+ Modem Router User Manual
Section 4 - Conguration
Channel Cong
Click Internet Setup on the left menu to configure your connection manually.
This section is only recommended for advanced users. It is recommended to use the
Setup Wizard to set up your Internet connection.
The following sections describe how to Create a New Connection, Modify an existing
connection, or Delete a connection.
WAN PHYSICAL TYPE
Allows you to choose DSL WAN or Ethernet WAN. If you choose Ethernet WAN,, LAN Port
4 is used as the WAN port.
DEFAULT ROUTE SELECTION
Choose Auto or Specified. Auto is recommended for most configurations. Specified
allows you to customize WAN IP settings for unusual routing configurations.
CHANNEL CONFIGURATION
This panel is for manually configuring your WAN connection. It’s options change
depending on other selections and is described in detail beginning on page 35.
To Next Page
Loading...
