DSL-2750E User Manual
19
The following table describes the parameters in this page.
Field
Description
Enable
Select this to turn Wi-Fi on.
Enable MultiAP
Isolation
Select this to turn MultiAP isolation on.
Wireless
Network Name
(SSID)
The Wireless Network Name is a unique name that
identifies a network. All devices on a network must
share the same wireless network name in order to
communicate on the network. If you decide to change
the wireless network name from the default setting,
enter your new wireless network name in this field.
Visibility Status
Select Visible, the SSID can be detected. Select
, the SSID cannot be detected.
Select the country you located from the drop-down list.
Control
Sideband
Choose the channel selection mode as Upper or
Lower.
Wireless
Select the wireless channel from the pull-down menu.
It is different for different country.
802.11 Mode Select the appropriate 802.11 mode based on the
To Next Page
Loading...
Need help?
ADSL Standards
