DSL-2750E User Manual
20
Field
Description
wireless clients in your network. It is recommended to
keep it as default.
Band Width
Select the appropriate band of 20M, 40M or 20M/40M
according to your subscribed broadband service.
There is a 2-Dimension Code on the right of the page. This code can help your
cellphone connect to the wireless network of DSL-2750E automatically by
shooting the 2-Dimension code with the cellphone.
Note:
A cellphone can not connect to the wireless network unless a
2-Dimension code software is installed on your cellphone.
Click Apply to save the settings.
3.2.3.2 Wireless Security
In the Wireless page, click Wireless Security. The page shown in the following
figure appears. Wireless security is vital to your network to protect the wireless
communication among wireless stations, access points and wired network.
If the Security Mode is set to be WEP, the following page appears.
To Next Page
Loading...
Need help?
ADSL Standards
