DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Configuring via Web-based Interface
Figure 79. The page for creating a new PPTP connection. The IPv4 section.
Parameter Description
Obtain DNS server
addresses
automatically
Move the switch to the right to configure automatic assignment of
DNS server addresses. Upon that the Primary DNS and
Secondary DNS fields are not available for editing.
Primary DNS /
Secondary DNS
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Figure 80. The page for creating a new L2TP Dual Stack connection. The IPv6 section.
Parameter Description
IPv6 (for the L2TP Dual Stack type)
Get IPv6
Select a method for IPv6 address assignment from the drop-down
list or leave the Automatically value.
Page 101 of 352
To Next Page
Loading...
