DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Configuring via Web-based Interface
(&1
On the Connections Setup / WAN Failover page, you can enable the WAN backup function,
which provides you with uninterrupted access to the Internet. When your main connection breaks
down, the router activates the backup connection; and when the main channel is recovered, the
router switches to it and disconnects the reserve one.
Figure 108. The Connections Setup / WAN Failover page.
To activate the backup function, create several WAN connections. After that go to the
Connections Setup / WAN Failover page, move the Enable switch to the right.
Page 136 of 352
To Next Page
Loading...
