D-Link DVG-5402G/GF - Traffic Balancing

DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Configuring via Web-based Interface
07
On the Connections Setup / Traffic balancing page, you can enable the traffic balancing
function. This function enables equal load balancing on the router and increases maximum
bandwidth of your Internet connection while using several WAN connections (for example, if
access to the Internet is provided by several ISPs).
Figure 111. The Connections Setup / Traffic Balancing page.
To enable the traffic balancing function, move the Enable switch to the right. Then add
connections to the page among which traffic will be balanced. To do this, click the ADD button
( ) in the Connections List section.
Figure 112. The window for adding a new connection to the page.
Page 141 of 352