DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Configuring via Web-based Interface
System
In this menu you can do the following:
• change the password used to access the router's settings
• restore the factory default settings
• create a backup of the router's configuration
• restore the router's configuration from a previously saved file
• save the current settings to the non-volatile memory
• reboot the router
• change the web-based interface language
• edit or add commands for the hardware buttons
• update the firmware of the router
• configure automatic notification on new firmware version
• configure rules to enable/disable Wi-Fi connection and the Wi-Fi filter, automatic reboot of
the device and saving a configuration backup to the connected USB storage on a schedule,
set rules for limitation of wireless client maximum bandwidth, and set a schedule for
different rules and settings of the firewall
• view the system log; configure sending the system log to a remote host and/or a USB
storage connected to the router
• check availability of a host on the Internet through the web-based interface of the router
• trace the route to a host
• enable or disable access to the device settings via TELNET and/or SSH
• configure automatic synchronization of the system time or manually configure the date and
time for the router
• enable the Auto Provision function.
Page 313 of 352
To Next Page
Loading...
