Need help?Do you have a question about the D-Link DVG-5402G and is the answer not in the manual?
General| Brand | D-Link |
|---|---|
| Model | DVG-5402G |
| Category | Network Router |
| Language | English |
Describes the router and intended users.
Explains manual notation conventions used in the document.
Outlines the organization and content of the manual chapters.
Provides a general description of the DVG-5402G/GF device's features.
Details the hardware and software specifications of the router.
Describes the physical appearance of the router's components.
Lists the items included in the router's package.
Provides prerequisites and essential information before installing the device.
Guides on connecting a PC to the router for configuration.
Instructions for accessing and navigating the router's web interface.
Guides through the initial setup and configuration of the router.
Allows choosing the router's operational mode (Router, AP, Repeater, etc.).
Configures a LAN port to function as a WAN port.
Steps to set up a WAN connection using a 3G/LTE USB modem.
Modifies the router's local IP address for the LAN.
Configures the router to connect to an existing wireless network as a client.
Guides on setting up wired WAN connections (Ethernet, SFP).
Configuration steps for a static IPv4 WAN connection.
Configuration steps for a static IPv6 WAN connection.
Configures various PPPoE based WAN connection types.
Configures PPPoE with a static IP address for dual access.
Sets up PPTP or L2TP WAN connections with dynamic IP.
Sets up PPTP or L2TP WAN connections with static IP.
Details on setting up wireless network names (SSID) and passwords.
Assigns LAN ports for IPTV set-top boxes or VoIP phones.
Instructions to change the administrator password for the web interface.
Displays statistics for all active connections (WAN, LAN, WLAN).
Shows information on devices assigned IP addresses by the DHCP server.
Displays routing rules and tables for network traffic management.
Lists connected devices and information on their current network sessions.
Shows traffic statistics passing through the router's ports.
Displays addresses of active multicast groups the device is subscribed to.
Manages WAN connections, including creation and editing.
Manages local area network settings.
Configures WAN backup connections for uninterrupted Internet access.
Enables automatic creation of mobile WAN connections with USB modems.
Enables load balancing across multiple WAN connections for increased bandwidth.
Configuration for IPsec VPN tunnels for secure IP communications.
Configuration for GRE VPN tunnels for tunneling network packets.
Configuration for EoGRE VPN tunnels, encapsulating Ethernet frames.
Configures fundamental wireless network parameters like SSID and channel.
Sets up wireless network security, including authentication and encryption types.
Manages and views wireless clients connected to the router.
Enables and configures Wi-Fi Protected Setup for easy device connection.
Configures Wi-Fi Multimedia for prioritizing traffic types and improving data transfer quality.
Configures the router to act as a client connecting to a wireless access point or WISP.
Specifies additional wireless network parameters for advanced tuning.
Configures MAC address-based filtering for devices on the LAN.
Configures the router to act as a print server for shared printers.
Displays data on connected USB storage devices, including space and file system.
Manages user accounts for accessing data on USB storage.
Enables the built-in Samba server for file sharing over the USB storage.
Enables the built-in FTP server for file sharing over the USB storage.
Allows viewing and managing files and folders on the USB storage.
Enables the built-in DLNA server for media streaming from USB storage.
Configures the built-in Transmission torrent client for downloading files.
Enables XUPNPD plug-in for broadcasting media content to DLNA devices.
Displays USB modem information and allows PIN code management.
Manages text messages for the connected USB modem.
Allows sending USSD commands to the mobile operator.
Creates and manages virtual networks (VLAN) for traffic separation.
Creates groups of interfaces and ports for traffic management.
Configures router ports to connect to a private Ethernet line.
Manages DNS server settings for name resolution.
Configures dynamic DNS service to associate domain names with dynamic IP addresses.
Configures Ethernet port speed, duplex mode, and flow control.
Configures notifications for Internet connection failure reasons.
Specifies static routes for network traffic management.
Configures the router for communication with a remote Auto Configuration Server.
Configures access rules for the router's web-based interface from external networks.
Enables UPnP IGD protocol for automatic configuration of network applications.
Transforms UDP traffic into HTTP traffic for devices unable to receive UDP streams.
Allows the router to use IGMP for managing multicast traffic.
Enables RTSP, SIP ALG, and pass-through functions for various protocols.
Enables VoIP functionality and manages profiles for connected phones.
Specifies additional profile settings for VoIP services.
Configures ring signal parameters for VoIP phones.
Configures filtering rules for incoming VoIP calls.
Configures basic and advanced profile settings for VoIP over SIP.
Configures VoIP calls based on specific events.
Configures speed dial parameters and dialplan settings for VoIP.
Configures call log parameters and views call history for SIP lines.
Creates and manages rules for filtering IP packets.
Creates virtual servers for redirecting incoming Internet traffic.
Configures the DMZ host for transferring requests to an internal network host.
Configures MAC address-based filtering for devices on the LAN.
Specifies restrictions on access to certain web sites for devices.
Enables blocking of advertisements during web surfing.
Manages router settings, including password, backup, and reboot.
Updates the router's firmware and configures automatic update checks.
Updates firmware locally using a downloaded file.
Updates firmware remotely via the D-Link update server.
Configures schedules for Wi-Fi connection and automatic device reboots.
Manages system log options and sending logs to remote hosts or USB storage.
Checks host availability using the Ping utility.
Determines the route of data transfer to a host using the traceroute utility.
Enables or disables access to device settings via Telnet and SSH.
Manually sets or automatically synchronizes the router's system time.
Enables ISP-based remote management and automatic device configuration.
Enables and configures the Yandex.DNS web content filtering service.
Assigns filtering modes to specific devices connected to the network.
Enables and configures the SkyDNS web content filtering service.
Assigns specific filtering profiles to devices connected to the router's network.
Provides essential safety precautions and conditions for using the device.
Offers guidelines for optimizing wireless network range and performance.
To Next Page
