DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Configuring via Web-based Interface
Auto Provision
On the System / Auto Provision page, you can enable the Auto Provision function.
The Auto Provision function allows your ISP to manage the device’s settings remotely: DVG-
5402G/GF connects to the ISP’s server, compares the current configuration file with the
configuration file stored on this server, and updates its settings if the files are different.
Figure 221. The page for configuring the Auto Provision function.
You can specify the following parameters:
Parameter Description
Enable Auto Provision
Move the switch to the right to enable the Auto Provision function.
Move the switch to the left to disable the Auto Provision function.
Use BOOTP option
If the switch is moved to the right, the parameters of your ISP's
server (the address, the location of the configuration file, and the
protocol) are automatically specified using DHCP options 66 and
67. Upon that a connection of the Dynamic IPv4 type should be
configured on the Connections Setup / WAN page.
If the switch is moved to the left, the parameters of your ISP's server
should be specified manually.
Page 295 of 311
To Next Page
Loading...
Need help?
General
