DVG-5402G/GF Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Configuring via Web-based Interface
Log
On the System / Log page, you can set the system log options and configure sending the system
log to a remote host and/or a USB storage connected to the router.
Figure 213. The System / Log page. The Settings tab.
To enable logging of the system events, go to the Settings tab and move the Enable switch to the
right. Then specify the needed parameters.
Page 285 of 311
To Next Page
Loading...
