DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Configuring via Web-based Interface
Fax Settings
On the VoIP / Profile Name / Fax Settings page, you can specify settings of data
receipt/transfer for the fax machines connected to the FXS ports of the router.
Figure 206. The VoIP / Profile Name / Fax Settings page.
Parameter Description
T.38
Enable T.38 support
Move the switch to the right to allow support of the T.38 protocol. If
the switch is moved to the right, the Fax/Modem determination
drop-down list and the Enable custom parameters switch are
displayed on the page.
Fax/Modem
determination
From the drop-down list, select a mode of fax/modem signal
detection.
Page 278 of 352
To Next Page
Loading...
