DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
PPP
MTU
The maximum size of units transmitted by the interface.
Keep Alive
If the switch is moved to the right, the router sends echo requests in
order to check the connection state. After several consecutive
unanswered requests the router restarts the PPP connection. If
needed, change the interval (in seconds) between requests and the
number of unanswered requests in the LCP interval and LCP
fails fields correspondingly or leave the default values.
Dial on demand
Move the switch to the right if you want the router to establish
connection to the Internet on demand. In the Maximum idle time
field, specify a period of inactivity (in seconds) after which the
connection should be terminated.
PPP debug
Move the switch to the right if you want to log all data on this PPP
connection debugging. Upon that the Debugging messages
value should be selected from the Level drop-down list on the
System / Log page (see the Log section, page 329).
Figure 90. The page for creating a new Mobile Internet connection. The IPv4 section.
Parameter Description
IPv4 (for the Dual and IPv4 types)
Obtain DNS server
addresses
automatically
Move the switch to the right to configure automatic assignment of
DNS server addresses. Upon that the Primary DNS and
Secondary DNS fields are not available for editing.
Primary DNS /
Secondary DNS
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Page 113 of 352
To Next Page
Loading...
