DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Configuring via Web-based Interface
In the Check with ping section, specify settings of checking the connection using ICMP ping
mechanism.
Parameter Description
Check with ping
Interval between checks
A time period (in seconds) between regular checks of the hosts’
availability. By default, the value 30 is specified. The value of this
field should be higher than product of Waiting for response and
Number of attempts fields values.
After a successful check the router keeps using the main connection.
If the check fails, the router repeats it. After two failed checks the
next operational connection from the list will be used as the default
connection.
Waiting for response
A time period (in seconds) allocated for a response to one ping
request.
Number of attempts
A check is considered failed in case none of the sent ping requests
receive a response.
Hosts
External IP addresses that the router will check for availability via
ICMP ping mechanism.
Click the ADD HOST button, and in the line displayed, enter an IP
address or leave values suggested by the router.
To remove an IP address from the list, click the Delete icon ( ) in
the line of the address.
When all needed settings are configured, click the APPLY button.
Page 138 of 352
To Next Page
Loading...
