DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
NAT VPN → LAN
If the switch is moved to the right, the network address translation
function between the VPN server’s interface and the local network
interface is enabled.
Authentication
Enable authentication
Move the switch to the right to enable authentication. Upon that the
Multiple sessions, CHAP, MSCHAP, MSCHAPv2, and PAP
lists are displayed on the page.
Multiple sessions
The mode of connection for the users listed in the Users List
section. Select a value from the drop-down list.
• Allow: Several users with the same user account are allowed
to connect.
• Only new connections: If there are several users with the
same user account, only new users are allowed to connect.
• Only old connections: If there are several users with the
same user account, new users are not allowed to connect.
CHAP
MSCHAP
MSCHAPv2
PAP
Challenge Handshake Authentication Protocol.
Microsoft Challenge Handshake Authentication Protocol.
Password Authentication Protocol.
Select the needed action from the drop-down list for the relevant
protocol.
• Auto: Enable automatic client authentication over this
protocol.
• Refuse: Disable client authentication over this protocol.
• Require: Require client authentication over this protocol.
MPPE
Enable MPPE
Move the switch to the right to enable MPPE encryption.
MPPE encryption can be applied only if the Require value is
selected from the MSCHAP or MSCHAPv2 drop-down list.
Page 158 of 352
To Next Page
Loading...
