DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
Interval
A time period (in seconds) allocated for one request to check the
state of the tunnel on the other end. By default, the value 5 is
specified.
Attempts
A number of failed attempts to check the state of the tunnel on the
other end after which the tunnel is disabled. By default, the value 5
is specified.
After configuring all needed settings, click the APPLY button.
To edit the parameters of an existing tunnel, in the Tunnels section, select the relevant tunnel in
the table. On the opened page, change the needed parameters and click the APPLY button.
To remove an existing tunnel, select the checkbox located to the left of the relevant line in the table
and click the DELETE button ( ).
VPN tunnels using EoIP technology will appear in the EoIP interfaces section on the
Advanced / VLAN page and will be automatically removed from this section after the tunnel is
deleted from the current page.
Page 166 of 352
To Next Page
Loading...
