DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Configuring via Web-based Interface
In the Main Settings section, you can specify the following parameters:
Parameter Description
Interface
From the drop-down list, select an interface to be used for the
authorization server.
A VLAN which includes a separate LAN port or a Wi-Fi network
(see the VLAN section, page 224) is used as an interface for the
server.
Lease time
The interval (in seconds) between sending authorization requests to
clients.
Logging level
Select a type of messages and alerts/notifications to be logged.
IP address
Specify an IP address of the router to be used for authorized client
access.
Mask
Specify a subnet mask.
Ping
If the switch is moved to the right, the router responds to ping
requests by the IP address specified on this page. For security
reasons, it is recommended to disable this function.
Figure 187. The page for adding an authorization server. The RADIUS server section.
In the RADIUS server section, you can specify the following parameters:
Parameter Description
Primary RADIUS server
address / Secondary
RADIUS server address
Enter addresses of the primary and secondary RADIUS servers in the
relevant fields.
Page 250 of 352
To Next Page
Loading...
