DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Configuring via Web-based Interface
Parameter Description
Forwarding
Enable
In the corresponding sections, move the Enable switch to the right
to enable forwarding always, on busy, or if there is no answer. When
the switch is moved to the right, the Call forwarding number and
Number of calls fields are available for editing.
Move the corresponding switch to the left if forwarding is not
required.
Call forwarding number A number to which the router redirects calls.
Number of calls
The number of calls before the router forwards a call to the number
specified in the Call forwarding number field. The field is
available for editing if the Enable switch in the If no answer
section is moved to the right.
After specifying the needed parameters, click the APPLY button.
To add a new line, in the List of SIP Lines section, click the ADD button ( ). On the opened
page, specify the needed parameters and click the APPLY button.
Page 271 of 352
To Next Page
Loading...
