DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Configuring via Web-based Interface
In the Codecs Settings section, you can configure work of voice codecs in use.
Figure 209. The VoIP / Profile Name / Audio Settings page. The Codecs Settings section.
To change parameters of a codec, left-click the relevant line in the table.
Figure 210. The window for changing the codec parameters.
In the opened window, you can specify the following parameters:
Parameter Description
Enable codec
To enable the codec, move the switch to the right.
To disable the codec, move the switch to the left.
Priority
Priority of the codec upon setting a voice session. Select the needed
value from the drop-down list.
Period of packetization
Quantity of milliseconds transmitted in one packet. Select the
needed value from the drop-down list.
Page 282 of 352
To Next Page
Loading...
