D-Link DVG-5402G/GF - Page 315

DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Configuring via Web-based Interface
!
Remember or write down the new password for the administrator account. In case of losing
the new password, you can access the settings of the router only after restoring the factory
default settings via the hardware RESET button. This procedure wipes out all settings that
you have configured for your router.
To change the web-based interface language, in the Miscellaneous section, select the needed
value from the Language drop-down list.
To change a period of inactivity after which the router completes the session of the interface, in the
Miscellaneous section, in the Idle time field, specify the needed value (in minutes). By default,
the value 5 is specified. Then click the SAVE button.
In the Action section, the following buttons are available:
Control Description
Factory
Click the button to restore the factory default settings. Also you can
restore the factory defaults via the hardware RESET button (see the
Side Panel section, page 19).
Backup
Click the button to save the configuration (all settings of the router)
to your PC or a USB storage connected to the router. See the
Creating Configuration Backup section, page 316 for details on
backup creation.
Restore
Click the button to select and upload a previously saved
configuration file (all settings of the router) located on your PC or a
USB storage connected to the router.
To upload a configuration file from your PC, select the Local
storage value from the File location drop-down list. Click the
CHOOSE FILE button and follow the dialog box appeared.
To upload a configuration file from a USB storage connected to the
router, select the USB Storage value from the File location
drop-down list. Then locate the needed configuration file. To do
this, click the Search icon ( ) in the Path field. Then choose
the needed file and click the SELECT button.
To upload the configuration file, click the APPLY button.
Save
Click the button to save settings to the non-volatile memory.
The router saves changed settings automatically. If changed settings
have not been saved automatically, a notification is displayed in the
top right part of the page.
Page 315 of 352