D-Link DWL-2100AP Command Line Interface Reference Manual

802.11 b/g Access Point Command Line Interface Manual
4
This screen displays all the possible command completions for ¡tftp¡
When you enter a command without a variable or value that needs to be specified, the CLI will prompt you with further information about what is needed to complete the command. For
example, if ¡snmp authtrap¡ was entered, the following screen open s:
The missing value for the ¡snmp authtrap¡ command, ¡enable/disable,¡ is displayed in the screen above.

D-Link DWL-2100AP Specifications

General

Frequency Band	2.4 GHz
Data Transfer Rate	54 Mbps
Security	WEP, WPA, WPA2
LAN Port	1 x 10/100Base-TX (RJ-45)
Device Type	Wireless Access Point
Form Factor	External
Data Link Protocol	IEEE 802.11b, IEEE 802.11g
Antenna Qty	1
Interface	1 x 10Base-T/100Base-TX - RJ-45
Power Supply	External power adapter
Wireless Standard	IEEE 802.11b/g
Antenna	Detachable
Compliant Standards	IEEE 802.11b, IEEE 802.11g
Encryption Algorithm	WEP, WPA, WPA2
Authentication Method	RADIUS
Features	MAC address filtering
Operating Modes	Access Point, Repeater