D-Link DWR-118 - Pppoe

12D-Link DWR-118 User Manual
Section 4 - Conguration
PPPoE
Enter the PPPoE username provided by your ISP.
Enter the PPPoE password provided by your ISP.
Re-enter the PPPoE password for verication.
Enter the PPPoE service name provided by your ISP if applicable.
Enter the IP address provided by your ISP here.
Enter the primary DNS server provided by your ISP here.
Enter the secondary DNS server provided by your ISP here.
Enter the MAC address, or click Clone to clone your client’s MAC
address to the WAN port.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity (if you select Auto-reconnect
below, this setting will have no eect).
Maximum Transmission Unit - you may need to change the MTU
for optimal performance with your ISP. The default value is 0.
Check the box to allow the router to automatically attempt to
reconnect whenever the Internet connection is lost.
Username:
Password:
Verify Password:
Service Name:
IP Address:
Primary DNS
Server:
Secondary DNS
Server:
MAC Address:
Maximum Idle
Time:
MTU:
Auto-reconnect: