32D-Link DWR-118 User Manual
Section 4 - Conguration
Check the box to enable Stateful Packet Inspection (SPI).
Check the box to enable DMZ.
Enter the IP address of the client you wish to expose, or select
the Computer Name from the drop-down menu and click << to
automatically enter the IP information.
Enable SPI:
Enable DMZ:
DMZ IP Address:
DMZ (Exposed Host)
On this page you can enable or disable Demilitarized Zone (DMZ). This completely exposes the client to threats over the Internet, and is not
recommended in ordinary situations.
To Next Page
Loading...
