D-Link DWR-118 - Outbound Filter

38D-Link DWR-118 User Manual
Section 4 - Conguration
Outbound Filter
Check this box to enable the lter.
You may select Always On or choose the number of a schedule
rule that you have dened. Click Copy to to copy the rule to the
specied ID.
Select whether to Allow or Deny all data to pass except those
matching the rules congured on this page.
Identies the lter.
Specify the local IP address and then specify the port after the
colon.
Specify the remote IP address and then the port after the colon.
Select this box to enable the lter.
Specify the schedule rule number or click Add New Rule... to add
a new schedule rule.
Outbound Filter:
Use schedule
rule:
Outbound Filter
rules list:
ID:
Source IP : Ports:
Destination IP :
Ports:
Enable:
Schedule Rule #:
The Outbound Filter enables you to control what packets are allowed to pass through the router. The outbound lter applies to all outbound
packets.