D-Link DWR-118 - Inbound Filter

39D-Link DWR-118 User Manual
Section 4 - Conguration
Inbound Filter
Check this box to enable the lter.
You may select Always On or choose the number of a schedule
rule that you have dened. Click Copy to to copy the rule to the
specied ID.
Select whether to Allow or Deny all data to pass except those
matching the rules congured on this page.
Identies the lter.
Specify the local IP address and then specify the port after the
colon.
Specify the remote IP address and then the port after the colon.
Select this box to enable the lter.
Specify the schedule rule number or click Add New Rule... to add
a new schedule rule.
Inbound Filter:
Use schedule
rule:
Inbound Filter
rules list:
ID:
Source IP : Ports:
Destination IP :
Ports:
Enable:
Schedule Rule #:
The Inbound Filter enables you to control what packets are allowed to pass through the router. The inbound lter only applies to packets that
are destined for virtual servers or DMZ hosts.