D-Link DWR-512 - Router Configuration; Accessing D-Link DWR-512 Web Configuration

9D-Link DWR-512 User Manual
Section 3 - Conguration
Conguration
This section will show you how to congure your new D-Link mobile router using the web-based conguration utility.
Web-based Conguration Utility
To access the conguration utility, open a web-browser such as Internet Explorer and
enter the IP address of the router (192.168.0.1 by default).
To log in to the conguration utility, enter admin as the username, and then enter the
password. By default, the password is blank.
If you get a Page Cannot be Displayed error, please refer to the Troubleshooting
section for assistance.
The conguration utility will open to the STATUS > DEVICE INFO page. You can view
different conguration pages by clicking on the categories at the top of the screen
(SETUP/ADVANCED/TOOLS/STATUS/SUPPORT), and then selecting a conguration
page from the bar on the left side.
The following pages will describe each section in detail, starting with the SETUP pages.