D-Link DWR-512 - Pptp

17D-Link DWR-512 User Manual
Section 3 - Conguration
PPTP
Choose this Internet connection if your ISP provides you PPTP account. After modifying any settings, click Save Settings to save your
changes.
Choose Static IP only if your ISP assigns you an IP
address. Otherwise, please choose Dynamic IP.
Enter the information provided by your ISP.
(Only applicable for Static IP PPTP.)
Enter the information provided by your ISP.
(Only applicable for Static IP PPTP.)
Enter the information provided by your ISP.
(Only applicable for Static IP PPTP.)
IP address of PPTP server.
User/account name that your ISP provides to you for PPTP dial-up.
Password that your ISP provides to you for PPTP dial-up.
Fill in with the same password in Password eld.
Choose Always-on when you want to establish PPTP connection
all the time. If you choose Connect-on-demand, the device will
establish PPTP connection when local users want to surf Internet,
and disconnect if no trafc after time period of Maximum Idle Time.
The time of no activity to disconnect your PPTP session. Set
it to zero or choose Always-on to disable this feature.
Address Mode:
PPTP IP Address:
PPTP Subnet Mask:
PPTP Gateway IP
Address:
PPTP Server IP
Address:
Username:
Password:
Verify Password:
Reconnect Mode:
Maximum Idle Time: