D-Link DWR-512 - L2 Tp

18D-Link DWR-512 User Manual
Section 3 - Conguration
L2TP
Choose this Internet connection if your ISP provides you L2TP account. After modifying any settings, click Save Settings to save your
changes.
Choose Static IP only if your ISP assigns you an IP
address. Otherwise, please choose Dynamic IP.
Enter the information provided by your ISP.
(Only applicable for Static IP L2TP.)
Enter the information provided by your ISP.
(Only applicable for Static IP L2TP.)
Enter the information provided by your ISP.
(Only applicable for Static IP L2TP.)
IP address of L2TP server.
User/account name that your ISP provides
to you for L2TP dial-up.
Password that your ISP provides to you for L2TP dial-up.
Fill in with the same password in Password eld.
Choose Always-on when you want to establish L2TP
connection all the time. Choose Connect-on-demand
the device will establish L2TP connection when local
users want to surf Internet, and disconnect if no
trafc after time period of Maximum Idle Time.
The time of no activity to disconnect your L2TP session.
Set it to 0 or choose Always-on to disable this feature.
Address Mode:
L2TP IP Address:
L2TP Subnet Mask:
L2TP Gateway IP
Address:
L2TP Server IP
Address:
Username:
Password:
Verify Password:
Reconnect Mode:
Maximum Idle Time: