D-Link DWR-512 - Firmware

51D-Link DWR-512 User Manual
Section 3 - Conguration
Firmware
Displays your current rmware’s version.
Displays your current rmware’s release date.
After you have downloaded a new rmware, click
Browse to locate the rmware on your computer,
then click Upload to start the rmware upgrade.
Warning: You must use a wired computer to upload the
rmware le; do not use a wireless computer.
During the upgrade process, do not power off
your computer or router, and do not refresh the
browser window until the upgrade is complete.
If the rmware you want to install is not an ofcial
D-Link release, you will need to check this checkbox.
Warning: Unofcial rmwares are not supported, and may
cause damage to your device. Use of unofcial
rmwares is at your own risk.
Here, you can upgrade the rmware of your router. Make sure the rmware you want to use is on the local hard drive of the
computer and then click Browse to upload the le. You can check for and download rmware updates at the D-Link support site at
http://support.dlink.com. After modifying any settings, click Save Settings to save your changes.
Current Firmware
Version:
Current Firmware
Date:
Browse:
Accept Unofcial
Firmware: