71D-Link DWR-512 User Manual
Section 4 - Connecting to a Wireless Network
Congure WPA-PSK
It is recommended to enable WPA on your wireless router or access point before conguring your wireless adapter. If you are joining an
existing network, you will need to know the WPA key being used.
2. Highlight the wireless network (SSID) you would like to connect to
and click Connect.
1. Open the Windows
®
XP Wireless Utility by right-clicking
on th e wire l ess c o mpu t e r ico n in yo u r sys t e m tra y
(lower-right corner of screen). Select View Available Wireless
Networks.
To Next Page
Loading...
