D-Link DWR-512 - Tools; Admin

46D-Link DWR-512 User Manual
Section 3 - Conguration
ADMINISTRATOR
Enter and conrm the password that the admin account
will use to access the router’s management interface.
REMOTE MANAGEMENT
Tick this check box to enable remote management.
Remote management allows the DWR-512 to be
congured over the Internet through a web browser.
A username and password will still be required
to access the Web-Management interface.
Enter the Internet IP address of the PC that has access
to the Broadband Router. If you enter an asterisk (*)
in this eld, then anyone will be able to access the
Router. Adding an asterisk (*) into this eld could
present a security risk and is not recommended.
This is the port number used to access the router. 8080 is
the port usually used for the Web-Management interface.
Admin
The Admin page allows you to change the Administrator password and enable Remote Management. The admin has read/write access
while users only have read-only access. Only the admin has the ability to change both admin and user account passwords. After modifying
any settings, click Save Settings to save your changes.
Admin Password:
Remote Management:
IP Allowed to Access:
Port:
Tools
The TOOLS pages allow you to adjust various system setting for your router, such as
the system time, rmware, and custom schedules. To view the Tools pages, click on
TOOLS at the top of the screen.