D-Link DWR-512 - Page 17

12D-Link DWR-512 User Manual
Section 3 - Conguration
Choose this if your Internet connection automatically provides you with an IP Address.
Most cable modems use this type of connection. See “Dynamic IP (DHCP)” on
page 15 for information about how to congure this type of connection.
Choose this option if your Internet connection requires a username and password
to connect. Most DSL modems use this style of connection. See “PPPoE” on
page 16 for information about how to congure this type of connection.
Choose this option if your Internet connection requires Point-to-Point Tunneling Protocol (PPTP).
See “PPTP” on page 17 for information about how to congure this type of connection.
Choose this option if your Internet connection requires Layer 2 Tunneling Protocol (L2TP).
See “L2TP” on page 18 for information about how to congure this type of connection.
Choose this connection if you have installed a SIM card into the DWR-512. See “3G”
on page 19 for information about how to congure this type of connection.
Choose this option if your Internet Setup Provider provided you with IP Address information that has to be
manually congured. See “Static IP” on page 14 for information about how to congure this type of connection.
DHCP Connection
(Dynamic IP Address):
Username / Password
Connection (PPPoE):
Username / Password
Connection (PPTP):
Username / Password
Connection (L2TP):
3G Connection:
Static IP Address
Connection:
The subsequent conguration pages will differ depending on the selection you make on this page.
After entering the requested information,click Next to continue.
This completes the Internet Connection Setup Wizard. Click Connect to save your
changes and reboot the router.